Use Cool-It Mat to battle excessive heat and noise that penetrate the driver compartment through firewalls and floorboards. It is also perfect in doors, under hoods, and above transmission housings. Cool-It Mat is composed of resin-bonded, silica blanketing insulation, sandwiched between a Mylar facing on one side and a foil facing on the other. The Mylar side reflects heat up to 2000°F away from surfaces, while the foil side is oriented away from the heat source to conduct any penetrating heat across its surface -- thus providing the ultimate in heat protection. The silica blanketing is a dual-density composite, and is the main sound insulator. It is easy to trim and can be applied with either push-in fasteners, which are provided, or any weather strip adhesive. Cool-It Mat is about 1/2" thick and available in three convenient sizes, including a 50' roll. |